Dip application is a simple method of impregnation and is used for all types of wire wound electrical components.
The component is dipped into the impregnation material until it is fully immersed.
Air in the component is displaced by the impregnating material and the component is then removed to drain; this is followed by a curing process in an oven.
The component can be pre-heated before dipping if a hot dip process is required. This gives the advantage of faster penetration, better filling content and control of the process.
Do you need further information about our impregnating materials? Please get in touch with us. We are looking forward to your email to impregnation.elantas.europe@altana.com.
REQUEST TECHNICAL PRODUCT DATASHEET
Typical ELANTAS Dip / Hot Dip varnishes and resins:
| Product | Viscosity | Temperature Index | Typical Cure Scheldule | Description |
| ELAN-protect? UP 142 | 900 – 1500 mPa.s 23°C | 180 | 1 h / 150°C or 30 mins / 160°C | Single component, UL recognised, unsaturated polyester-imide resin, low viscosity, VOC free, high bond strength, quick surface drying, stable, for stators and rotors. For dip, hot dip, trickle and dip-roll application. |
| ELAN-protect? EP 101# | 400 – 2500 mPa.s 25°C | 180 | 3 h / 165°C | Single component, UL recognised, epoxy resin, low viscosity, excellent moisture and chemical resistance. Suitable for low voltage electric motor stators. For dip, hot dip, dip-roll and trickle application. |
| ELAN-protect? UP 343 | 4500 – 5500 mPa.s 23°C | 200 | 2 h / 150°C | Single component, UL recognised, polyester-imide resin, crack-free curing in thick layers, excellent penetration capacity, high elasticity, for stators and transformers. For hot dip application. |
| Epoxylite? H 1009 # | 1000 – 3500 mPa.s 25°C | 180 | 6 h / 130°C or 3 h / 165°C | Single component, epoxy resin, mechanically tough and resilient, excellent chemical and moisture resistance. Suitable for low voltage electric motors, coils and transformers. For dip, hot dip, VI and VPI application. |
| Dobeckan? 825034 | 150 – 200 s Ford 4 Cup 25°C | 180 | 2 h / 150°C | Single component, UL recognised, polyester resin, low viscosity, low emission, flexible and resilient, suitable for stators, transformers and general purpose use. For dip application. |
| Dobeckan? FT 1052/…EK | 100 – 110 s ISO Cup 4 mm 23°C | 180 | 1 h / 150°C | Single component, UL recognised, polyester-imide resin, contains styrene, little secondary drainage, high filling ability, for processing of motors, generators and transformers. For dip and dip-roll application. |
| Dobeckan? FT 2015/…EK | 90 – 120 s ISO Cup 4 mm 23°C | 200 | 1 h / 150°C | Single component, UL recognised, polyester-imide resin, contains vinyl toluene, little secondary drainage, high filling ability, excellent thermomechanical strength. For processing of motors, generators and transformers. For dip, dip-roll, VI and VPI application. |
| Elmotherm? UF 92 (N) | 42 – 52 s ISO Cup 6mm 23°C | 180 | 6 h / 130°C or 4 h / 120°C + 4 h / 150°C | Solvented impregnating varnish, UL recognised, without aromatic and halogenic components, elastic, resistant to lowest temperatures, for generators and drives in mining and shipbuilding. For dip and hot dip application. |
| Elmotherm? 073-1010 | 135 – 165 s B4 Cup 21°C | 200 | 6 h / 130°C or 2 h / 180°C | Solvented varnish, high build, excellent stability. Tough and resilient with excellent chemical resistance. Used by OEM's and repairers for electric motor stators and transformers. For dip and hot dip application. |
| Elmotherm? VF 970 | 60 - 90 s ISO Cup 6 mm 25°C | 200 | 6 h / 130°C or 3 h / 150°C | Solvented varnish, high bond strength, excellent moisture, chemical and Freon resistance. Designed for impregnation of rotating electrical equipment. For dip and hot dip application. |
| Aquanel? VF111## | 30 - 60 s ISO Cup 6 mm 25°C | 180 | 3h / 130°C | Water-based varnish, UL recognised, low temperature curing, solvent free, for the general impregnation of electrical windings. For dip and hot dip application. |
| Aquanel? 014-3997/40 | 35 - 45 s B2 Cup 21°C | 180 | 3 h / 160°C | Single component, solventless emulsion, zero VOC, high bond strength, high chemical and moisture resistance, for the impregnation of stators, rotors and small transformers. For dip, hot dip and dip-roll application. |